Indesit VIA 640 0 C Bedienungsanleitung PDF herunterladen (Seite 6)

DAILY USE

SWITCHING THE HOB ON/OFF

To switch the hob on, press the button for approx. 2 seconds until

the cooking zone displays light up.

To switch o, press the same button until the displays switch o. All the

cooking zones are deactivated.

If the hob has been in use, the residual heat indicator “H” remains lit until

the cooking zones have cooled down.

If within 10 seconds of switching on, no function is selected, the hob

switches o automatically.

SWITCHING ON AND ADJUSTING COOKING ZONES

Place the pot on the desired cooking

zone. Turn on the cooking top. Then

activate the selected cooking zone

by pressing the corresponding

position button. The display shows

“0”. It is possible to select the

required power level, from min. 0 to

max. 9, or booster “P” if available. To increase the power level, push the “+”

button. To decrease the power level push the “−” button.

DEACTIVATION OF COOKING ZONES

To switch o the cooking zone, press the corresponding position button

for more than 3 sec.

The cooking zone switches o and, if still hot, the letter “H” appears on

the zone display.

CONTROL PANEL LOCK

This function locks the controls to prevent accidental activation of the hob.

To activate the control panel lock, switch the hob on and press the Control

panel lock button for three seconds; an acoustic signal and a luminous

indicator near the padlock indicate function activation. The control panel

is locked except for the switching o function.

To deactivate the control lock, repeat the activation procedure. The

luminous dot goes o and the hob is active again.

The presence of water, liquid spilled from pots or any objects resting on

the button below the symbol can accidentally activate or deactivate the

control panel lock.

TIMER

The timer can be used to set the cooking time for a maximum of 99

minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used with the timer, press the Timer

button and a beep indicate function activation. The display shows “00”

and the LED indication comes on. The Timer value can be decreased and

increased by keeping “+” and “

−

” buttons pressed.

Power indicator display

Selected cooking zone indicatio

Cooking zone positioning

When the set time has elapsed, an acoustic signal sounds and the

cooking zone switches o automatically.

To deactivate the timer, keep the Timer button pressed for at least 3 seconds.

To set the timer for another zone, repeat the above steps. The timer display

always shows the timer for the selected zone or the shortest timer.

To modify or deactivate the timer, press the cooking zone selection

button for the timer in question.

RESIDUAL HEAT INDICATOR

The hob is tted with a residual heat indicator for each cooking zone.

These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual

heat indicator of a given cooking zone is lit, that zone can be used, for

example, to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes o.

INCORRECT OR MISSING POT INDICATOR

If you are using a pot that is not suitable, not correctly positioned or not

of the correct dimensions for your induction hob, the message “no pot”

will appear in the display (

). In these situations it is recommended

to reposition the pot on the hob surface until you nd the position of

operation. If no pot is detected within 60 seconds, the hob switches o.

ACTIVATION/DEACTIVATION OF THE ACOUSTIC SIGNAL

After switching the hob on, press and hold the “+” button and the

outermost button on the right simultaneously for at least three seconds

(as shown below).

3 Sec.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit VIA 640 0 C Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit VIA 640 0 C