Indesit TIS 633 T L S Bedienungsanleitung PDF herunterladen (Seite 15)

• The display will show the text DE and MO and the hob

will be switched off.

• When the hob is switched on again it will be set to the

“demo” mode.

To exit this mode, follow the procedure described above.

The display will show the text DE and OF and the hob will

be switched off. When it is next switched on, the hob will

function normally.

Practical advice on using the appliance

! Use cookware made from materials which are

compatible with the induction principle (ferromagnetic

material). We especially recommend pans made

from: cast iron, coated steel or special stainless

steel adapted for induction. Use a magnet to test the

compatibility of the cookware.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel 

Copper, 

Aluminium, Glass, Earthenware, 

Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

• Use pans with a thick, flat base in order to fully utilise the

cooking zone.

• Always use pans with a diameter which is large

enough to cover the hotplate fully, in order to use all the

available heat.

• Make sure that the base of the cookware is always clean

and dry, in order to fully utilise and extend the life of both

the cooking zones and the cookware.

• Avoid using the same cookware which has been used

on gas burners: the heat concentration on gas burners

may distort the base of the pan, causing it not to adhere

correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device.

The hotplate only emits heat when a pan with suitable

measurements for the cooking zone is placed on it. If the

power level indicator display flashes, this may be because:

• An incompatible pan

• A pan whose diameter is too small

• The pan has been removed from the hotplate.

Overheating protection

If the electronic elements overheat, the hob switches off

automatically and

appears on the display, followed by

a flashing number. When the temperature has reached a

suitable level, this message disappears and the hob may be

used again.

Safety switch

The appliance has a safety switch which automatically switches

the cooking zones off after they have been in operation for a

certain amount of time at a particular power level. When the safety

switch has been triggered, the display shows “0”.

For example: the rear right-hand hotplate is set to 5 and will

switch off after 7 and a half hours of continuous operation,

while the front left-hand hotplate is set to 2 and will switch off

after 9 and a half hours.

Power level

Maximum operating time in hours

9,5

8,5

7,5

6,5

5,5

3,5

2,5

Buzzer

This can also indicate several irregularities:

• An object (a pan, cutlery, etc.) has been placed on the control

panel for more than 10 seconds.

• Something has been spilt on the control panel.

• A button has been pressed for too long. All of the above

situations may cause the buzzer to sound. Remove the cause

of the malfunction to stop the buzzer. If the cause of the

problem is not removed, the buzzer will keep sounding and the

hob will switch off.

! Do not use adapters, diffusers, or metal plates on the

cooking zones .They may have a detrimental effect

upon the hob’s performance, and might damage the

hob’s aesthetics.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit TIS 633 T L S Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit TIS 633 T L S