Indesit PH 960 T GH AUS Bedienungsanleitung PDF herunterladen (Seite 8)

4. Once this procedure is nished, replace the old rating sticker with one

indicating the new type of gas used. Sticker are available from any of our

Service Centres.

• Adjusting the burners’ primary air

Does not require adjusting.

• Setting the burners to minimum

1. Turn the tap to the low ame position;

2. Remove the knob and adjust the adjustment

screw, which is positioned in or next to the tap

pin, until the ame is small but steady.

3. Having adjusted the ame to the required low setting, while the burner is

alight, quickly change the position of the knob from minimum to maximum

and vice versa several times, checking that the ame does not go out.

4. Some appliances have a safety device (thermocouple) tted. If the device

fails to work when the burners are set to the low ame setting, increase

this low ame setting using the adjusting screw.

5. Once the adjustment has been made, replace the seals on the by-passes

using sealing wax or a similar substance.

! If the appliance is connected to liquid gas, the regulation screw must be

fastened as tightly as possible.

! Once this procedure is nished, replace the old rating sticker with one

indicating the new type of gas used. Stickers are available from any of our

Service Centres.

! Should the gas pressure used be different (or vary slightly) from the

recommended pressure, a suitable pressure regulator must be tted to the

inlet pipe (in order to comply with current national regulations).

Electrical

connections

DATA PLATE

see data plate

This appliance conforms to the following

European Economic Community directives:

- 2006/95/EEC dated 12/12/06 (Low

Voltage) and subsequent amendments

- 2004/108/EEC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2009/142/EEC dated 30/11/09 (Gas) and

subsequent amendments.

- 2012/19/EC and subsequent

amendments.

Checking the operation

Ignite each burner and check the appearance of the ame, the ame should

be blue and burn smoothly on high & low.

Ensure complete igniton of all burners.

Where the data plate is obscured by cabinetry when the cooker is in the

installed position, place the supplied duplicate data plate to a suitable adjacent

surface or within the instruction manual for future reference.

For other minor adjustments or if the appliance does not perfrom correctly;

contact Arisit Pty Ltd 1300 762 219

Rapid (R)

Semi Rapid (S)

Auxiliary (A)

Triple Crown (TC)

Fish Burner (FB)

Total

Burner Ø Injector

(mm)

GC (MJ/hr)

1.29

1.10

0.80

1.75

1.01

8.3

6.0

3.3

14.50

4.5

41.1

Ø Injector

(mm)

0.80

0.64

0.50

1.05

0.64

8.5

5.0

3.0

13.7

5.2

40.6

GC (MJ/hr)

Natural gas (1.0 kPa) ULPG (2.75 kPa)

Burner and nozzle specifications

PH 960 T GH AUS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit PH 960 T GH AUS Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit PH 960 T GH AUS