
GB
13
3. Replace all the components by repeating the steps in reverse order.
Replacing the Triple ring burner nozzles
1. Remove the pan supports and lift the burners out of their housing. The
burner consists of two separate parts (see pictures).
2. Unscrew the nozzles using a 7 mm socket spanner. Replace the nozzles
1). The two nozzles have the same hole diameter.
3. Replace all the components by completing the above operations in reverse
order.
• Adjusting the burners’ primary air
Does not require adjusting.
• Setting the burners to minimum
2. Remove the knob and adjust the adjustment
screw, which is positioned in or next to the tap
alight, quickly change the position of the knob from minimum to maximum
5. Once the adjustment has been made, replace the seals on the by-passes
using sealing wax or a similar substance.
! If the appliance is connected to liquid gas, the regulation screw must be
fastened as tightly as possible.
!
indicating the new type of gas used. Stickers are available from any of our
Service Centres.
! Should the gas pressure used be different (or vary slightly) from the
inlet pipe (in order to comply with current national regulations).
Collegamenti
elettrici
TARGHETTA CARATTERISTICHE
vedi targhetta caratteristiche
Questa apparecchiatura è conforme alle
seguenti Direttive Comunitarie:
- 2006/95/CE del 12/12/06 (Bassa
Tensione) e successive modificazioni
- 2004/108/CE del 15/12/04 (Compatibilità
Elettromagnetica) e successive
modificazioni
- 93/68/CEE del 22/07/93 e successive
modificazioni.
- 2009/142/CE del 30/11/09 (Gas) e
successive modificazioni.
- 2012/19/UE e successive modificazioni.
Regolamento (EU) No 66/2014 che integra la
Direttiva 2009/125/EC.
Norma EN 60350-2
Norma EN 30-2-1
ECODESIGN
Kommentare zu diesen Handbüchern