Indesit KP9F21S(X)/EX S Bedienungsanleitung PDF herunterladen (Seite 7)

Install a standardised plug corresponding to the load indicated

on the appliance data plate (see Technical data table).

The appliance must be directly connected to the mains using

an omnipolar switch with a minimum contact opening of 3

mm installed between the appliance and the mains. The

switch must be suitable for the charge indicated and must

comply with current electrical regulations (the earthing wire

must not be interrupted by the switch). The supply cable

must be positioned so that it does not come into contact

with temperatures higher than 50°C at any point.

Before connecting the appliance to the power supply, make

sure that:

 

the law.

     

appliance, which is indicated by the data plate.

 

on the data plate.

 

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only.

! The manufacturer declines any liability should these

safety measures not be observed.

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or

coloured Red.

Connect the Blue wire to the terminal marked “N” or

coloured Black.



   



Replacing the cable



of 3 x 1.5 mm². The yellow-green earth wire must be 2 ÷ 3

cm longer than the other wires.

Gas connection

Connection to the gas network or to the gas cylinder



in accordance with current national legislation and after

making sure that the appliance is suited to the type of gas

with which it will be supplied (see the rating sticker on the

cover: if this is not the case see below). When using liquid

gas from a cylinder, install a pressure regulator which

complies with current national regulations.

! Make sure that the gas supply pressure is consistent

with the values indicated in the Table of burner and nozzle

specifications (see below). This will ensure the safe

operation and durability of your appliance while maintaining





Make sure that the hose complies with current national

legislation. The internal diameter of the hose must measure:

8 mm for a liquid gas supply;13 mm for a methane gas

supply.

Once the connection has been performed, make sure that

the hose:

 

temperatures of over 50°C.

 

is not kinked or bent.

 

or moving parts and that it is not compressed.

          

condition may be checked.

 

 

using clamps which comply with current regulations.

!

cooker must be installed according to the conditions listed

for class 2 - subclass 1 appliances (installed between two



(see below).



a threaded attachment

Make sure that the hose and gaskets comply with current

national legislation. To begin using the hose, remove the

hose holder on the appliance (the gas supply inlet on the



! Perform the connection in such a way that the hose length

does not exceed a maximum of 2 metres, making sure that

the hose is not compressed and does not come into contact

with moving parts.

Checking the connection for leaks

When the installation process is complete, check the hose



Adapting to different types of gas

It is possible to adapt the appliance to a type of gas other

than the default type (this is indicated on the rating label

on the cover).

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KP9F21S(X)/EX S Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit KP9F21S(X)/EX S