Indesit KN3N11SA(W)/BG S Bedienungsanleitung PDF herunterladen (Seite 25)

! If one or more of these conditions is not fulfilled or

if the cooker must be installed according to the

conditions listed for class 2 - subclass 1 appliances

(installed between two cupboards), the flexible steel

hose must be used instead (

see below

Connecting a flexible jointless stainless steel pipe

to a threaded attachment

Make sure that the hose and gaskets comply with

current national legislation.

To begin using the hose, remove the hose holder on the

appliance (the gas supply inlet on the appliance is a

cylindrical threaded 1/2 gas male attachment).

! Perform the connection in such a way that the hose

length does not exceed a maximum of 2 metres,

making sure that the hose is not compressed and

does not come into contact with moving parts.

Checking the connection for leaks

When the installation process is complete, check

the hose fittings for leaks using a soapy solution.

Never use a flame.

Adapting to different types of gas

It is possible to adapt the appliance to a type of gas

other than the default type (this is indicated on the

rating label on the cover).

Adapting the hob

Replacing the nozzles for the hob burners:

1. Remove the hob grids and

slide the burners off their

seats.

2. Unscrew the nozzles using a

7 mm socket spanner (

see

figure

), and replace them with

nozzles suited to the new type

of gas(

see Burner and nozzle

specifications table

3. Replace all the components by following the

above instructions in reverse.

Adjusting the hob burners’ minimum setting:

1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory

screw, which is positioned inside or next to the tap

pin, until the flame is small but steady.

! If the appliance is connected to a liquid gas

supply, the regulatory screw must be fastened as

tightly as possible.

3. While the burner is alight, quickly change the position

of the knob from minimum to maximum and vice versa

several times, checking that the flame is not

extinguished.

! The hob burners do not require primary air adjustment.

We recommend cleaning the oven before using it for

the first time, following the instructions provided in

the "Care and maintenance" section.

TECHNICAL DATA

Oven dimensions

(HxWxD)

34x39x44 cm

Volume

60 l

Maximum absorber

power:

2100 W

Useful

measurements

relating to the oven

compartment

width 42 cm

depth 44 cm

height 23 cm

Power supply voltage

and frequency

see data plate

Burners

may be adapted for use with any

type of gas shown on the data

plate, which is located inside the

flap or, after the oven

compartment has been opened,

on the left-hand wall inside the

oven.

Electric Plate

Rapid Ø 145 mm: 1500 W

Rapid Ø 180 mm: 2000 W

ENERGY LABEL

Directive 2002/40/EC on the label

of electric ovens

Norm EN 50304

Energy consumption Class

certification Natural convection

heating mode: Static

EC Directives: 2006/95/EC dated

12/12/06 (Low Voltage) and

subsequent amendments -

2004/108/EC dated 15/12/04

(Electromagnetic Compatibility)

and subsequent amendments -

2009/142/EC dated 30/11/09

(Gas) and subsequent

amendments - 93/68/EEC dated

22/07/93 and subsequent

amendments - 2002/96/EC.

Data plate, is located inside the flap or, after the oven

compartment has been opened, on the left-hand wall

inside the oven.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KN3N11SA(W)/BG S Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit KN3N11SA(W)/BG S