Indesit FRIS 621 CPT B.S Bedienungsanleitung PDF herunterladen (Seite 14)

Practical advice on using the appliance

! Use cookware made from materials which are

compatible with the induction principle (ferromagnetic

material). We especially recommend pans made

from: cast iron, coated steel or special stainless

steel adapted for induction. Use a magnet to test the

compatibility of the cookware.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel 

Copper, 

Aluminium, Glass, Earthenware, 

Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

• Use pans with a thick, flat base in order to fully utilise the

cooking zone.

• Always use pans with a diameter which is large

enough to cover the hotplate fully, in order to use all the

available heat.

• Make sure that the base of the cookware is always clean

and dry, in order to fully utilise and extend the life of both

the cooking zones and the cookware.

• Avoid using the same cookware which has been used

on gas burners: the heat concentration on gas burners

may distort the base of the pan, causing it not to adhere

correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device.

The hotplate only emits heat when a pan with suitable

measurements for the cooking zone is placed on it. If the

power level indicator display flashes, this may be because:

• An incompatible pan

• A pan whose diameter is too small

• The pan has been removed from the hotplate.

Overheating protection

If the electronic elements overheat, the hob switches off

automatically and

F appears on the display, followed by

a flashing number. When the temperature has reached

a suitable level, this message disappears and the hob

may be used again.

Safety switch

The appliance has a safety switch which automatically

switches the cooking zones off after they have been in

operation for a certain amount of time at a particular power

level. When the safety switch has been triggered, the

display shows “0”.

For example: the rear right-hand hotplate is set to 5

and will switch off after 7 and a half hours of continuous

operation, while the front left-hand hotplate is set to 2

and will switch off after 9 and a half hours.

Power level

Maximum operating time in hours

9,5

8,5

7,5

6,5

5,5

3,5

2,5

Buzzer

This can also indicate several irregularities:

• An object (a pan, cutlery, etc.) has been placed on the

control panel for more than 10 seconds.

• Something has been spilt on the control panel.

• A button has been pressed for too long. All of the above

situations may cause the buzzer to sound. Remove the

cause of the malfunction to stop the buzzer. If the cause

of the problem is not removed, the buzzer will keep

sounding and the hob will switch off.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FRIS 621 CPT B.S Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit FRIS 621 CPT B.S