Indesit ZIU6 F1T W Gebrauchs- und Pflegeanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 15
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
EN
5
Use & Care guide
PRODUCT DESCRIPTION
1. Control panel
2. Ice tray*
3. Drawer divider*
4. Bottle rack*
5. Glass shelves
6. Rating plate with commercial name
7. Door reversibility kit
8. Area for freezing fresh food or to
store frozen food
9. Area for storing frozen foods
10. Door seal
9
8
1
5
7
2
3
4
6
10
* Available only on certain models
TEMPERATURE ALARM INDICATOR
When the product is plugged in to the mains, during the
rst 10 minutes of working, any temperature sensor failure
will be displayed on the control panel.
Led ON Led OFF
Legend:
Led flashing
The appliance will work anyway preserving the food stored,
but it is necessary to contact after-sales service and provide
alarm code.
Note: The Temperature alarm may activate if the door is left open
for a prolonged period of time or following the introduction of
fresh food in the freezer compartment; this temporary rise in
temperature does not aect the storage of already frozen food in
any way.
FAST FREEZING FUNCTION
The use of this function is recommended to increase the
cooling speed when placing a very high quantity of food in
the freezer compartment. To activate this function press the
Temperature button on the control panel repeatedly until 3
LED’s ash and then remain lit.
The function is automatically deactivated after 48 h.
TEMPERATURE SETTING
Press the Temperature button on the control panel to adjust
the temperature from the warmest through the lower to the
coldest level.
Pressing the Temperature button, the temperature setting
will change cyclically.
At rst plug-in of appliance temperature setpoint is present
at medium position (factory setting).
Following table shows temperature setpoints:
Led ON Led OFF
Led ON
Led OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Note: Displayed set points correspond to the average
temperature throughout the whole freezer.
STANDBY BUTTON
To put the product in Stand-by, press and hold for 3 seconds
the Stand-by button. All the indicators turn o. To reactivate
the appliance press once (briey) or for 3 seconds this
button.
CONTROL PANEL
1. Temperature alarm indicator
2. Fast freezing function
3. Temperautre settings
(stand by button)
2.
1.
3.
Seitenansicht 4
1 2 3 4 5 6 7 8 9 10 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare