Indesit SBL 2023 F/HA Bedienungsanleitung Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
16
GB
Using the freezer to its full potential
Use the FREEZER OPERATION knob to adjust the
temperature (see Description).
Do not re-freeze food that is defrosting or that has already
been defrosted. These foods must be cooked and eaten
(within 24 hours).
Fresh food that needs to be frozen must not come into
contact with food that has already been defrosted. Fresh
food must be stored in the top FREEZER and STORAGE
compartment where the temperature drops below -18°C
and guarantees rapid freezing.
! to avoid blocking the air circulation inside the
freezer compartment, it is advisable not to obstruct
the ventilation holes with food or containers.
Do not place glass bottles which contain liquids, and
which are corked or hermetically sealed in the freezer
because they could break.
The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator
compartment (for example: Kg/24h: 4).
To freeze (if the freezer is already operating):
press the rapid freezing SUPER FREEZE button
(corresponding yellow indicator light illuminates), insert
the food and close the door. The function is disabled
automatically after 24 hours or when optimal
temperatures have been reached (indicator light goes
out);
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature
inside the freezer, ensuring that foods are conserved for
at least 9 -14 hours.
ICE CARE tray
The fact that they are situated on the top part of the
freezer drawers ensures greater cleanliness: the ice
no longer comes into contact with the food placed
inside the freezer compartment; furthermore, the
dripping of the water during filling is avoided (a lid to
cover up the hole after filling with water is also
provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice
cubes from dispensing (if this happens, wait for the
ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected
compartments each mould fills with water (see
diagram).
4. Close the opening with the lid provided and put the
tray back.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a
hard surface and wet the outside so that the ice
cubes come loose and take them out through the
opening.
WATER LEVEL
MAX
WATER LEVEL
MAX
WATER LEVEL
MAX
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare