Indesit SIAA 12 S (UK) Betriebsanweisung PDF herunterladen (Seite 6)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of

the appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

• The appliance is earthed and the plug is compliant with the

law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on the

bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left side

(e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If

the socket is incompatible with the plug, ask an authorised

technician to replace it (see Assistance). Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these safety

measures not be observed.

Stability bracket

WARNING: To prevent the fridge from tilting forwards, it must be

held in place with the stability bracket supplied.

This is the responsibility of the customer.

Fixed to the floor or wall at the rear of the fridge, the stability

bracket hooks onto the compressor mounting plate holding the

fridge secure.

The stability bracket must be installed securely in

accordance with these instructions BEFORE using the fridge.

Note: The fridge is heavy so care must be taken when

moving it.

1. Position the fridge in its chosen location.

2. Looking from the front of the fridge, mark the position of the

left hand panel.

3. Move the fridge far enough away to get clear access to the

back wall.

4. In order to clear components on the compressor mounting

plate, the stability bracket must be positioned on the floor

between 100 - 200mm to the right of the left hand panel

mark.

5. Mark and drill the fixing holes and insert suitable fixings to

hold the bracket firm.

6. Carefully re-position the fridge. Make sure that the

compressor mounting plate locates into the stability bracket.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (see Installation).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal

light illuminates.

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment

automatically adjusts itself according to the position of the

thermostat knob.

= warmest = coldest

We recommend, however, a medium position.

The cooling section of the refrigerator is located inside the

back wall of the refrigerator compartment for increased space

and improved aesthetics. During operation, the back wall will

be covered in frost or water droplets depending on whether

the compressor is operating or paused. Do not worry, the

refrigerator is functioning normally.

If the REFRIGERATOR OPERATION knob has been set on high

values with large quantities of food and with a high ambient

temperature, the appliance can operate continuously, resulting

in excessive frost formation and excessive energy consumption:

compensate for this by shifting the knob towards lower values

(defrosting will occur automatically). In static appliances, the

* Varies by number and/or position, available only on certain

models.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit SIAA 12 S (UK) Betriebsanweisung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gefrierschränke Indesit SIAA 12 S (UK)