Indesit DVGN 623 IX Bedienungsanleitung PDF herunterladen (Seite 13)

 Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

or moved, please ensure the manual is kept with the

machine, so that the new owner may benefit from the

advice contained within it.

 Please read this instruction manual carefully: it

contains important information regarding the safe

installation, use and maintenance of the appliance.

 If the appliance must be moved at any time, keep

it in an upright position; if absolutely necessary, it

may be tilted onto its back.

Positioning and levelling

1. Remove the appliance from all packaging and

check that it has not been damaged during

transportation.

If it has been damaged, contact the retailer and do

not proceed any further with the installation process.

2. Check the dishwasher by placing it so that its

sides or back panel are in contact with the adjacent

cabinets or even with the wall. This appliance can

also be recessed under a single worktop (

see the

Assembly instruction sheet

3. Position the dishwasher on a level and sturdy floor.

If the floor is uneven, the front feet of the appliance

may be adjusted until it reaches a horizontal position

(the angle of inclination must not exceed 2 degrees).

If the appliance is levelled correctly, it will be more

stable and much less likely to move or cause

vibrations and noise while it is operating.

Connecting the water and electricity

supplies

 Connection to the water and electricity supplies

should only be performed by a qualified technician.

 The dishwasher should not stand on top of the

water hoses or the electricity supply cable.

The water inlet (A) and outlet (B) hoses and the

electricity supply cable may be positioned towards

the right or the left in order to achieve the best

possible installation (

see figure

Connecting the water inlet hose

• To a suitable cold water connection point: before

attaching the hose, run the water until it is

perfectly clear so that any impurities that may be

present in the water do not clog the appliance;

after performing this operation, screw the inlet

hose tightly onto a tap with a ¾ gas threaded

connection.

• To a suitable hot water connection point: your

dishwasher may be provided with hot water from

the mains supply (if you have a central heating

system with radiators) provided that it does not

exceed a temperature of 60°C.

Screw the hose to the tap as described for

connection to a cold water supply.

 If the inlet hose is not long enough, contact a

specialist store or an authorised technician (

see

Assistance

 The water pressure must be within the values

indicated in the Technical data table (

see below

 The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the

water supply in the event of anomalies or leaks from

inside the appliance.

- is provided with a

Water Stop

* safety device, in

other words it has a water inlet hose that consists of

a transparent hose on the outside and a red hose on

the inside: both the hoses can withstand extremely

high pressure. If the internal hose breaks, the

external hose becomes a bright red colour and

carries the water instead, thus avoiding any leakage.

 It is very important to check the external hose

regularly: if it is a bright red colour, it must be

replaced by an authorised technician as soon as

possible (

see Assistance

* Only available in selected models.

148

12083

121168

100

Installation

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit DVGN 623 IX Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Indesit DVGN 623 IX