Indesit AWM 108 (EU).N Bedienungsanleitung PDF herunterladen (Seite 18)

Instructions for the fitter

Mounting the wooden panel onto the

door and inserting the machine into

cabinets:

In the case where the machine must be ship-

ped for final installation after the wooden panel

has been mounted, we suggest leaving it in its

original packaging. The packaging was desig-

ned to make it possible to mount the wooden

panel onto the machine without removing it

completely (see figures below).

The wooden panel that covers the face of

the machine must not be less than 18 mm

in thickness and can be hinged on either the

right or left. For the sake of practicality when

using the machine, we recommend that the

panel be hinged on the same side as the door

for the machine itself - the left.

Tur seite

Door Mounting Accessories (Fig. 1-2-3-4-5).

Fig. 1

N° 2 Hinges

N° 1 Magnet N° 1 Magnet plate

N° 1 Rubber plug

N° 2 Hinge Supports

N° 4 Spacers

Fig. 2

Fig. 3 Fig. 4

Fig. 5

Fig. 4/B

- No. 6 type A self-threading screws, l =13 mm.

- No. 2 type B metric, countersunk screws,

l =25; for fastening the magnet plate to the

cabinet.

- No. 4 type C metric screws, l =15 mm; for

mounting the hinge supports to the cabinet.

- No. 4 type D metric screws, l =7 mm; for

mounting the hinges on the supports.

Mounting the Parts onto the Face of the

Machine.

- Fit the hinge supports to the appliance front

panel, positioning the hole marked with an ar-

row in fig. 1 so that it is on the inner side of the

front panel. Fit a spacer (fig. 4/B) between the

surfaces using type C screws.

- Fit the magnet plate at the top of the op-

posite side, using type B screws to fix two

spacers (fig. 4/B) between the plate and the

surface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit AWM 108 (EU).N Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit AWM 108 (EU).N