Indesit ARTXD 129 (EU) Bedienungsanleitung PDF herunterladen (Seite 21)

Wash cycles and functions

Wash functions

Stain removal

This function is particularly useful for the removal of stubborn stains.

To run the bleach cycle on

its own, pour the bleach into

compartment 4, set the “Rinse”

programme and activate the

“Stain removal” programme.

To bleach during a wash cycle,

pour in the detergent and any

fabric softener you wish to use,

set the desired wash cycle

and enable the “Stain removal”

function.

! It cannot be used with the

, , , Spin, Pump out, programmes.

Prewash

If this function is selected, the pre-wash cycle will run; this

is useful for removing stubborn stains.

N.B.: put the detergent in the relevant compartment.

! It cannot be used with the , , , , , , , programmes.

Table of wash cycles

Extra rinse

By selecting this option, the efficiency of the rinse is increased

and optimal detergent removal is guaranteed. It is particularly

useful for sensitive skin.

! It cannot be used in conjunction with the , Spin, Pump

out, programmes.

Easy iron

By selecting this function, the wash and spin cycles will be

modified in order to reduce the formation of creases. The wash

cycles ends with the laundry being left to soak in the machine; the

EASY IRON and START/PAUSE indicator lights will flash (orange)

and the text “STOP WITH WATER” will appear on the display. To

drain the water so that the laundry may be removed, press the

START/PAUSE button or the EASY IRON button.

! It may not be used with the , , , programmes.

Fast wash

Reduces the duration of the wash cycle, while making it

possible to save water and electricity.

! It cannot be used with the , , , , programmes.

Wash cycles

Description of the wash cycle

Max.

temp.

(°C)

Max.

speed

(rpm)

Detergents

Max. load (kg)

Residual

dampness %

Energy

consumption

kWh

Total water lt

Cycle

duration

Prewash Wash

Fabric

softener

Ble-

ach

Everyday wash cycles (Daily)

Cotton: extremely soiled whites. 90° 1200

  

- 6 53 1,92 67 160’

Cotton Standard 60° (1) (1° press of the button): heavily soiled whites

and resistant colours.

60° 1200 -

  

6 53 1,04 50,0 165’

Cotton Standard 40° (2) (2° press of the button): lightly soiled whites

and delicate colours.

40° 1200 -

  

6 53 1,09 92 160’

Cotton Standard 20° (3° press of the button): lightly soiled whites

and delicate colours.

20° 1200 -

  

6 - - - 180’

Synthetics (1° press of the button): heavily soiled resistant colours. 60° 800

   

3 44 0,85 39 110’

Synthetics (3) (1° press of the button): lightly soiled resistant colours. 40° 800

   

3 44 0,53 39 100’

Synthetics (2° press of the button): lightly soiled whites and delicate colours. 40° 800

   

3 - - - 75’

Mix 30’ (1° press of the button): to refresh lightly soiled garments quickly (not

suitable for wool, silk and clothes which require washing by hand).

30° 800 -

 

- 3 71 0,25 33 30’

Mix 15’ (2° press of the button): to refresh lightly soiled garments quickly (not

suitable for wool, silk and clothes which require washing by hand).

30° 800 -

 

- 1,5 71 0,08 29 15’

Special cycles / Memory

Memory: allows for any wash cycle to be stored.

Baby cycle: heavily soiled delicate colours. 40° 800 -

  

2 - - - 120’

Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -

 

- 1 - - - 55’

Wool: for wool, cashmere, etc. 40° 800 -

 

- 1 - - - 65’

Partial wash cycles

Spin (1° press of the button) - 1200 - - - - 6 - - - 16’

Rinse (2° press of the button) - 1200 - -

 

6 - - - 36’

Pump out (3° press of the button) - 0 - - - - 6 - - - 2’

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as

water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle (1° press of the button) with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments

which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle (2° press of the button) with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments