Indesit IWSNE 61253CECO EU.M Bedienungsanleitung PDF herunterladen (Seite 8)

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the button;

theSTART/PAUSEindicatorlightwillflashslowlyina

green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in “Detergents

and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE.SettheWASHCYCLE

knob to the desired programme; a temperature and spin

speed is set for each wash cycle; these may be adjusted.

The duration of the cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin

speed. The machine automatically displays the

maximum temperature and spin speed values set for

the selected cycle, or the most recently-used settings

if they are compatible with the selected cycle. The

temperature can be decreased by pressing the

button, until the cold wash “OFF” setting is reached.

The spin speed may be progressively reduced by

pressing the button, until it is completely excluded

(the “OFF” setting). If these buttons are pressed again,

the maximum values are restored.

! Exception: if the 2 programme is selected, the

temperature can be increased up to a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the symbol lights up on the

display. To remove the delayed start option press the

button until the text “OFF” appears on the display.

Modifying the cycle settings.

• Press the button to enable the option; the indicator

light corresponding to the button will switch on.

• Press the button again to disable the option; the

indicator light will switch off.

! If the selected option is not compatible with the

programmed wash cycle, the indicator light will flash

and the option will not be activated.

! If the selected option is not compatible with another

option which has been selected previously, the indicator

light corresponding to the first option selected will flash

and only the second option will be activated; the indicator

light corresponding to the enabled option will remain lit.

! The options may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME.PresstheSTART/

PAUSEbutton.Thecorrespondingindicatorlightwill

become green, remaining lit in a fixed manner, and the

door will be locked (the DOOR LOCKED symbol will

be on). To change a wash cycle while it is in progress,

pause the washing machineusingtheSTART/PAUSE

button(theSTART/PAUSEindicatorlightwillflash

slowly in an orange colour); then select the desired

cycleandpresstheSTART/PAUSEbuttonagain.

To open the door while a cycle is in progress, press

theSTART/PAUSEbutton;iftheDOORLOCKED

symbol is switched off the door may be opened (wait

approximately3minutes).PresstheSTART/PAUSE

button again to restart the wash cycle from the point at

which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text “END” on the display; when the

DOOR LOCKED symbol switches off the door may be

opened (wait approximately 3 minutes). Open the door,

unload the laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the button. The cycle will be stopped

and the machine will switch off.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IWSNE 61253CECO EU.M Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit IWSNE 61253CECO EU.M