Indesit KN3N65SA(W)/BG Bedienungsanleitung PDF herunterladen (Seite 13)

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Never use steam cleaners or pressure cleaners on

the appliance.

• The stainless steel or enamel-coated external parts

and the rubber seals may be cleaned using a

sponge that has been soaked in lukewarm water

and neutral soap. Use specialised products for the

removal of stubborn stains. After cleaning, rinse well

and dry thoroughly. Do not use abrasive powders or

corrosive substances.

• The hob grids, burner caps, flame spreader rings

and burners may be removed to make cleaning

easier; wash them in hot water and non-abrasive

detergent, making sure all burnt-on residue is

removed before drying them thoroughly.

• For hobs with electronic ignition, the terminal part of

the electronic lighting devices should be cleaned

frequently and the gas outlet holes should be

checked for blockages.

• The inside of the oven should ideally be cleaned

after each use, while it is still lukewarm. Use hot

water and detergent, then rinse well and dry with a

soft cloth. Do not use abrasive products.

•

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then

dry thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack.

• The accessories can be washed like everyday

crockery, and are even dishwasher safe.

TOpen the cover fully and pull it upwards (see figure).

! Do not close the cover when the burners are alight or

when they are still hot.

! Remove any liquid from the lid before opening it.

Inspecting the oven seals

Check the door seals around the oven regularly. If

the seals are damaged, please contact your nearest

Authorised After-sales Service Centre. We recommend

that the oven is not used until the seals have been

replaced.

Replacing the oven light bulb

1. After disconnecting the oven from the electricity

mains, remove the glass lid covering the lamp socket

(see  gure).

2. Remove the light bulb and replace it with a similar

one: voltage 230 V, wattage 25 W, cap E 14.

3. Replace the lid and reconnect the oven to the

electricity supply.

Gas tap maintenance

Over time, the taps may become

jammed or difficult to turn. If this

occurs, the tap must be replaced.

! This procedure must be

performed by a qualified

technician who has been

authorised by the manufacturer.

Assistance

Please have the following information to hand:

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the data plate located

on the appliance and/or on the packaging.

Care and maintenance

WARNING! The glass lid can break in if it

is heated up. Turn off all the burners and

the electric plates before closing the lid

The cover

If the cooker is fitted with

a glass cover, this cover

should be cleaned

using lukewarm water.

Do not use abrasive

products.

It is possible to remove

the cover in order to

make cleaning the area

behind the hob easier.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KN3N65SA(W)/BG Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit KN3N65SA(W)/BG