Indesit FZ 99 C.1 (AN) Bedienungsanleitung PDF herunterladen (Seite 22)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Cleaning the appliance

 The stainless-steel or enamel-coated external

parts and the rubber seals may be cleaned using

a sponge that has been soaked in lukewarm water

and neutral soap. Use specialised products for

the removal of stubborn stains. After cleaning,

rinse and dry thoroughly. Do not use abrasive

powders or corrosive substances.

 The inside of the oven should ideally be cleaned

after each use, while it is still lukewarm. Use hot

water and detergent, then rinse well and dry with

a soft cloth. Do not use abrasive products.

 All accessories - with the exception of the sliding

racks - can be washed like everyday crockery,

and are even dishwasher safe.

 Never use steam cleaners or pressure cleaners on

the appliance.

Cleaning the oven door

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then

dry thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack. For more thorough cleaning purposes, the

oven door may be removed:

1. Open the oven door fully

(see diagram).

2. Lift up and turn the small levers located on the

two hinges (see diagram).

With glass panel fitted to

the inside of the door

3. Grip the door on the two

external sides and close it

approximately half way. Pull

the door towards you, lifting it

out of its slot (see diagram).

3. (With glass panel fitted to

the inside of the door) Grip the

door on the two external sides

and close it approximately

half way. Unlock the door by

pressing on the clamps F,

then pull the door towards you

lifting it out of its seat (see

diagram).

To replace the door, reverse this sequence.

Inspecting the seals

Check the door seals around the oven regularly. If

the seals are damaged, please contact your nearest

After-sales Service Centre (see Assistance). We

recommend that the oven is not used until the seals

have been replaced.

Replacing the light bulb

To replace the oven light bulb:

1. Remove the glass cover of the lamp-holder.

2. Remove the light bulb and replace it with a similar

one: Wattage 25 W, cap E 14.

3. Replace the glass cover (see diagram).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FZ 99 C.1 (AN) Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit FZ 99 C.1 (AN)