Indesit IDE 102 SK.2 Bedienungsanleitung PDF herunterladen (Seite 11)

Setting a half load and a delayed start

How to set a delayed start

When you have loaded the dishes, you can choose when to

start your dishwasher before setting the wash cycle desired.

• Press button "P" repeatedly to postpone the start of the

wash cycle from 1 hour to 24h.

• If you press the button again, the word "OFF" is displayed

(no selection made).

Once you have made your selection, make sure the appliance

door is shut and start the wash cycle by pressing the START

button.

Symbol "I" lights up on the display and the countdown

begins.

• Once the countdown is up, the wash cycle begins and the

approximate amount of time left until the end of the wash

cycle is displayed.

Have you changed your mind?

• If you change your mind, you can set a shorter time delay:

press button "P" to select it. You need not reset the wash

cycle.

• If you have changed your mind and wish to start the wash

cycle immediately, press button "P" until the countdown is

fully reset. Indicator light "I" will turn off and the cycle will

start at the sound of a beep.

The indicator light corresponding to the cycle phase under

way will come up on the display and the countdown to the

estimated cycle end begins.

You want to wash on one rack only?

Remember to use half the amount of detergent.

When you only have little cutlery to wash, you can run just

half a load on the upper rack, saving on both water and

electricity.

• Press button "F"; you will hear a beep and the symbol

corresponding to the half load will light up.

Once you have made your setting, start the wash cycle by

pressing the START button.

- This option is available with all wash cycles.

- The Just You wash cycle is programmed to wash on the

upper rack only.

Warning: if the display indicates the word "dON" when you turn

your dishwasher on, this means the demo mode is in operation. This

mode is useful for exhibitors in that it simulates the wash cycles

without actually carrying them out.

To quit this mode, keep the START/RESET button "R" pressed for

approximately 4 seconds. The word "dOF" will be displayed once

you have quit the demo mode successfully.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IDE 102 SK.2 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer / Küchenmaschine Zubehör Indesit IDE 102 SK.2