Indesit KN6I66A(X)/FR Bedienungsanleitung PDF herunterladen (Seite 29)

3. Confirm by pressing the button.

To cancel a programme, follow the above

instructions. At step 2, press the

- button: the

duration decreases progressively until it reaches 0

and switches off. The programme resets and the

display exits programming mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99

minutes.

1. Press the

programming button until the timer

indicator light is illuminated.

2. Set the desired duration using the

- and

buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When

the time has elapsed, a buzzer will sound (for one

minute).

Control panel lock

When the hob is switched on, it is possible to lock

the oven controls in order to avoid accidental

changes being made to the settings (by children,

during cleaning, etc.). Press the

button to lock

the control panel: the indicator light above the button

will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

button

for a few moments, the indicator light will switch off

and the lock function will be removed.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob

is switched on again. In order to switch the hob on

again, you must first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration

mode where all the controls work normally but the

heating elements do not switch on. To activate the

“demo” mode the hob must be switched on, with all

the hotplates switched off.

• Press and hold the

+ and

- buttons

simultaneously for 6 seconds. When the 6

seconds have elapsed, the ON/OFF and

CONTROLS LOCKED indicator lights will flash for

one second. Release the

and

buttons and

press the

button;

• The display will show the text DE and MO and the

hob will be switched off.

• When the hob is switched on again it will be set to

the “demo” mode.

To exit this mode, follow the procedure described

above. The display will show the text DE and OF

and the hob will be switched off. When it is next

switched on, the hob will function normally.

Practical advice on using the appliance

! Use cookware made from materials which are

compatible with the induction principle

(ferromagnetic material). We especially recommend

pans made from: cast iron, coated steel or special

stainless steel adapted for induction. Use a magnet

to test the compatibility of the cookware.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel

Copper,

Aluminium, Glass, Earthenware,

Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

• Use pans with a thick, flat base in order to fully

utilise the cooking zone.

• Always use pans with a diameter which is large

enough to cover the hotplate fully, in order to use all

the available heat.

• Make sure that the base of the cookware is

always clean and dry, in order to fully utilise and

extend the life of both the cooking zones and the

cookware.

• Avoid using the same cookware which has been

used on gas burners: the heat concentration on

gas burners may distort the base of the pan,

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KN6I66A(X)/FR Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Indesit KN6I66A(X)/FR