Indesit KP6T71S(X)/IT Bedienungsanleitung PDF herunterladen (Seite 19)

Using the hob

Lighting the burners

For each BURNER knob there is a complete ring

showing the strength of the flame for the relevant

burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an

anticlockwise direction so that it is pointing to the

maximum flame setting

3. Adjust the intensity of the flame to the desired

level by turning the BURNER knob in an

anticlockwise direction. This may be the minimum

setting

, the maximum setting , or any position in

between the two.

The appliance is fitted with an

electronic lighting device

which is integrated into the

knob. Simply light the desired

burner by turning the

corresponding knob in an anti-

clockwise direction, until it is

aligned with the large flame

symbol, press it all the way in to activate the

electronic ignition and hold it in that position until the

burner is lit. The burner might be extinguished when

the knob is released. If this occurs, repeat the

process, holding the knob down for a longer period of

time.

 If the flame is accidentally extinguished, switch off

the burner and wait for at least 1 minute before

attempting to relight it.

The appliance is equipped with a flame failure safety

device; press and hold the BURNER knob for

approximately 2-3 seconds to keep the flame alight

and to activate the device.

To switch the burner off, turn the knob until it

reaches the stop position

.

Practical advice on using the burners

For the burners to work in the most efficient way

possible and in order to save on the amount of gas

consumed, it is recommended that only pans which

have a lid and a flat base are used. They should

also be suited to the size of the burner.

Start-up and use

To identify the type of burner, please refer to the

diagrams contained in the Burner and nozzle

specifications.

 Make sure the pans do not overlap the edges of

the hob while it is being used.

 For models equipped with a reducer grid, the latter

must be used only for the auxiliary burner, when

pans with a diameter of less than 12 cm are used.

Using the oven

 The first time you use your appliance, heat the

empty oven with its door closed at its maximum

temperature for at least half an hour. Ensure that the

room is well ventilated before switching the oven off

and opening the oven door. The appliance may emit

a slightly unpleasant odour caused by protective

substances used during the manufacturing process

burning away.

 Never put objects directly on the bottom of the

oven; this will prevent the enamel coating from being

damaged.

THERMOSTAT indicator light

When this is illuminated, the oven is generating

heat. It switches off when the inside of the oven

reaches the selected temperature. At this point the

light illuminates and switches off alternately,

indicating that the thermostat is working and is

maintaining the temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob

to any position other than 0. It remains lit as long

as the oven is operating. By selecting

with the

knob, the light is switched on without any of the

heating elements being activated.

Burner

ø Cookware Diameter (cm)

Rapid (R)

24 - 26

Semi-rapid (S)

16 - 22

Auxiliary (A)

10 - 14

Triple.ring (TC)

24 - 26

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KP6T71S(X)/IT Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küchen- und Haushaltswarenzubehör Indesit KP6T71S(X)/IT