Indesit KP6T71S(X)/IT Bedienungsanleitung PDF herunterladen (Seite 16)

 Fits firmly into place at both ends, where it will

be fixed using clamps which comply with

current national legislation.

 If one or more of these conditions is not fulfilled

or if the cooker must be installed according to the

conditions listed for class 2 - subclass 1

appliances (installed between two cupboards),

the flexible steel hose must be used instead (see

below).

Connecting a flexible jointless stainless steel

pipe to a threaded attachment

Make sure that the hose and gaskets comply

with current national legislation.

To begin using the hose, remove the hose holder

on the appliance (the gas supply inlet on the

appliance is a cylindrical threaded 1/2 gas male

attachment).

 Perform the connection in such a way that the

hose length does not exceed a maximum of 2

metres, making sure that the hose is not

compressed and does not come into contact with

moving parts.

Checking the tightness of the connection

When the installation process is complete, check

the hose fittings for leaks using a soapy solution.

Never use a flame.

Adapting to different types of gas

It is possible to adapt the appliance to a type of

gas other than the default type (this is indicated

on the rating label on the cover).

Adapting the hob

Replacing the nozzles for the hob burners:

1. Remove the hob grids and slide the burners

off their seats.

2. Unscrew the nozzles

using a 7 mm socket

spanner (see figure), and

replace them with nozzles

suited to the new type of

gas (see Burner and nozzle

specifications table).

3. Replace all the

components by following the above instructions in

reverse.

Adjusting the hob burners minimum setting:

1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory

screw, which is positioned inside or next to the tap

pin, until the flame is small but steady.

 If the appliance is connected to natural gas, the

adjustment screw must be loosened in an

anticlockwise direction.

3. While the burner is alight, quickly change the

position of the knob from minimum to maximum and

vice versa several times, checking that the flame is

not extinguished.

 The hob burners do not require primary air

adjustment.

 After adjusting the appliance so it may be used

with a different type of gas, replace the old rating

label with a new one which corresponds to the new

type of gas (these labels are available from

Authorised Technical Assistance Centres).

 Should the gas pressure used be different (or vary

slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet hose in

accordance with current national regulations relating

to regulators for channelled gas.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KP6T71S(X)/IT Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küchen- und Haushaltswarenzubehör Indesit KP6T71S(X)/IT