Indesit CX67SP6 X NG Bedienungsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
11
GB
If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
Planning cooking with the electronic
programmer*
Setting the clock
After the appliance has been connected to the power
supply, or after a blackout, the display will automatically
reset to 0:00 and begin to blink. To set the time:
1. Press the COOKING TIME button
$
and the
COOKING END TIME
%
simultaneously.
2. Within 4 seconds of having pressed these buttons, set
the exact time by pressing the
*
and
)
buttons. The
*
button advances the hours and the
)
button decreases
the hours.
Once the time has been set, the programmer
automatically switches to manual mode.
Setting the timer
The timer enables a countdown to be set, when the time
has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button
H. The display shows:
N.
2. Press the
*
and
)
buttons to set the desired time.
3. When the buttons are released the timer begins
counting down and the current time appears on the
display.
R
4. After the time has elapsed a buzzer will sound,
and this can be switched off by pressing any button
(except the
*
and
)
buttons). The symbol
H
will
switch off.
The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use the
)
button to adjust the volume of the alarm buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use and set
a suitable temperature using the SELECTOR and
THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
$
.
2. Within 4 seconds of having pressed this button, set the
desired amount of time by pressing the
*
and
)
buttons.
If, for example, you wish to set a cooking time of 30
minutes, the display will show:
N.
3. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the symbol
m
and the letter A (AUTO).
Next the desired cooking end time must be set:
4. Press the END COOKING TIME button
%
.
5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the
*
and
)
buttons. If, for example, you want cooking to end
at 13.00, the display shows:
O
6. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the letter A (AUTO).
P
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30
minutes, at 13.00.
Setting the cooking time with an immediate start
Follow the above procedure for setting the cooking time
(points 1-3).
When the letter A appears, this indicates that both the
cooking time and the end cooking time have been
programmed in AUTO mode. To restore the oven to
manual operation, after each AUTO cooking mode press
the COOKING TIME
$
and END COOKING TIME
%
buttons simultaneously.
The symbol
m
will remain lit, along with the oven, for
the entire duration of the cooking programme.
The set cooking duration can be displayed at any time by
pressing the COOKING TIME button
$>$
, and the
cooking end time may be displayed by pressing the END
COOKING TIME button
%
. When the cooking time has
elapsed a buzzer sounds. To stop it, press any button
apart from the
*
and
)
buttons.
Cancelling a previously set cooking programme
Press the COOKING TIME button
$
and the
COOKING END TIME
%
simultaneously.
Correcting or cancelling previously set data
The data entered can be changed at any time by
pressing the corresponding button (TIMER, COOKING
TIME or COOKING END TIME) and the
*
or
)
button.
When the cooking time data is cancelled, the cooking end
time data is also cancelled automatically, and vice versa.
If the oven has already been programmed, it will not
accept cooking end times which are before the start of the
programmed cooking process.
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare