Indesit SI E40 BA0 Bedienungsanleitung PDF herunterladen (Seite 26)

iten

Automatic Stand-by

function (H

)

LCD

The automatic switch-off function guarantees total

safety.

This function automatically switches off the iron when

it is not used for a few minutes. In particular:

• the iron switches off automatically after 30

seconds when left unattended in the ironing

position or sideways;

• the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).

Ifyouleavetheironunattended,thedisplayashesa

green light and an acoustic signal is emitted to inform

that the automatic stand-by function is active.

Simply move the iron or press the temperature buttons

+/-(4a)toswitchitbackon.

Wait until the display becomes red before

starting ironing again.

Automatic switch-off

function (H

)

The automatic switch-off function guarantees total

safety.

This function automatically switches off the iron when

it is not used for a few minutes. In particular:

• the iron switches off automatically after 30

seconds when left unattended in the ironing

position or sideways;

• the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).

If you leave the iron unattended an acoustic signal is

emitted to inform that the automatic switch-off function

is active.

Simply move the iron to switch it back on.

Wait until the temperature indicator light

turns off before starting ironing again.

CLEANING AND

MAINTENANCE

After use (I)

1. Setthesteamregulator(3)toOff,disconnectthe

appliance plug from the electrical socket and let

the iron cool down.

section“Selectingthetemperatureandadjusting

thesteam”).

Ironing with shot of steam (E

)

The shot of steam function allows you to eliminate

persistent wrinkles. You can use this function both in

no-steam and steam ironing mode.

1. Check that the water level in the reservoir is

higher than ¼.

2. Select the recommended ironing temperature

with the temperature control (4b) (see step B

andchapter“Usingtheiron”,section“Selecting

thetemperatureandadjustingthesteam”).

3. Press the shot of steam button (1) to obtain

an extra steam ow when ironing. If the shot

of steam function has not been used for some

time, it may be necessary to press the button

repeatedly to activate the pump.

FEATURES

Spray function (F)

The spray function is used to dampen the garment in

order to remove persistent wrinkles easily. You can

use the spray function both in no-steam and steam

ironing mode at any temperature.

1. Check that the water level in the reservoir is

higher than ¼.

2. With the iron in horizontal position, press the

spraybutton(2)todampenthegarment.

Vertical steam function (G)

The vertical steam function is useful to eliminate

wrinkles from hanging garments, curtains, etc. You

can use this function by simply placing the iron in

vertical position. All functions of the appliance will

remain unchanged also in this position (refer to

chapter“Use”accordingtothemodel).

Do not direct steam towards people or

animals and do not iron garments while

worn.

Anti-drip function

The iron is provided with anti-drip function in order to

automatically interrupt the steam distribution when the

temperature is too low, thus preventing water dripping

out of the soleplate.

Do not use steam with low temperatures

(see chart in step B

and B

, chapter “Using

the iron”, according to the type of iron you are

using).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit SI E40 BA0 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eisen Indesit SI E40 BA0