Indesit Hotpoint-ARISTON SG DC11AA0 Bedienungsanleitung PDF herunterladen (Seite 23)

iten

To determine the hardness degree of the water in

your area, contact your local water board or body.

This data is sometimes available on the board/body's

website too.

Filling the water reservoir (A)

Before every use and every time the no-water

indicatorlightturnson,llthewaterreservoir:

1. Use the special handle to remove the water

reservoir (8).

2. When lling the reservoir, make sure the

maximum level shown on the reservoir is not

exceeded.

3. Re-place the water reservoir in the relevant

housing until it clicks into place.

4. Repeat the operation every time the water-level

indicator light (17) turns on.

5. Press the On / Off button to restart ironing after

llingthewatertank.

Never add any perfume, vinegar, starch,

scale-removing agents, ironing products or

other chemicals in the water reservoir - unless

recommended by Hotpoint-Ariston. Never use

contaminated water.

USING YOUR IRON

Temperature selection and steam

adjustment (B)

If your Power Perfection is equipped with the Optimal

Soleplate Temperature technology, you need not

adjustthetemperature.

1. Connect the plug of the appliance to a grounded

socket (220/240V).

2. Press the ON button (18) - it will light up to show

that the steam generator is ON.

3. Wait until the temperature indicator light turns off

before starting ironing.

4. Select the appropriate steam setting by means

of the steam control (16) or set it to the Min

position to iron without steam. As soon as the

selected steam quantity is available, the Steam

Ready indicator light (20) will turn on.

5. You can iron all the types of fabrics that can be

ironed in any order.

In the version with no Optimal Soleplate Temperature

technology, follow the instructions below.

1. Connect the plug of the appliance to a grounded

socket (220/240V).

2. Press the ON button (18) - it will light up to show

in case of damage resulting from any improper

use of the appliance.

BEFORE USE

Beforeusing thePowerPerfection for thersttime,

remove all stickers, protective plastic or cardboard

packaging from the soleplate of the iron.

Make sure that all adhesive parts have been removed

from the soleplate using a damp soft cloth and remove

any residues or particles from the manufacturing

processbyrepeatedlyllingandemptyingthewater

reservoir.

When you switch on the Power Perfection

for the rst time, you may notice an

unpleasant smell, a little smoke and some

impurities. They will disappear in a few minutes.

When using the steam function for the rst time,

do not direct the steam jet on the garments

because manufacturing residues may be present

in the steam dispenser.

FILLING THE WATER

RESERVOIR

Water plays an essential role both in the ironing

process and in the good operation of the appliance

over a long lifespan. In particular, a high concentration

of limescale may damage some parts of the iron and

cause its early deterioration.

Power Perfection water tank has a capacity of 1000ml

with extra 200ml boiler.

Suitable water

Although the Power Perfection steam generator can

be used with tap water, if the water is very hard (as

measured in French degrees), we recommend mixing

tap water and demineralised water according to the

following table.

Hardness

degree [°f]

Proportion

[tap water:demineralised water]

7°f 1:0

7°f - 14°f 1:0,5

14°f - 22°f 1:1

22°f - 32°f 1:2

32°f - 54°f 1:3

>54°f 0:1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit Hotpoint-ARISTON SG DC11AA0 Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern