Indesit HI561 IXUK Bedienungsanleitung PDF herunterladen (Seite 7)

7GB

Ducting or Recirculation fitting

Ducting fitting

• The cooker hood can be ducted to the outside using

either rigid or flexible fire retardant ducting of 120 or

150 mm. The choice is left to the installer. When 120

mm ducting is to be used it will be necessary to install

the reduction flange item

A on the air outlet fig. 4.

• The installer should provide suitable ducting and sealing

material for the installation.

• The cooker hood can also be ducted to the outside

through one of the rectangular openings located in either

side of the lower section of the chimney stack. In this

case the deflector (item D) should be fitted into the

spigot (item R) to close the aperture which is not used

(fig. 5).

• If the hood is provided with the charcoal filters fitted,

the filters should be removed (see paragraph

Maintenance).

Recirculation fitting

• The filtered air is returned to the room through the two

side grilles on U-shaped lower section

I, which are either

formed in the metal itself (fig. 6).

• Fit the recirculation spigot item R into the round outlet

on top of the canopy while pressing down on the spigot

until it snaps into position.

• Install the charcoal filters inside the canopy as instructed

in paragraph Maintenance).

Fig. 4

243_A04

243_A05

Fig. 6

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Indesit HI561 IXUK Bedienungsanleitung Seite 7