Indesit BIAA 23 V SI Y Bedienungsanleitung PDF herunterladen (Seite 22)

TEMPERATURE Indicator light*: to identify the coldest area in the

refrigerator.

1. Check that OK appears clearly on the indicator light (see

diagram).

2. If the word “OK” does not appear it means that the temperature is

too high: adjust the REFRIGERATOR OPERATION knob to a

higher position (colder) and wait approximately 10 hours until the

temperature has been stabilised.

3. Check the indicator light again: if necessary, readjust it following

the initial process. If large quantities of food have been added or

if the refrigerator door has been opened frequently, it is normal

for the indicator not to show OK. Wait at least 10 hours before

adjusting the REFRIGERATOR OPERATION knob to a higher

setting.

AIR *

It is recognizable due to the presence of the mechanism on the top

part of the refrigerator compartment (

see diagram

AIR maximises air circulation, improving the efficiency of the

evaporator and helping to achieve the optimal temperature inside

the refrigerator as quickly as possible each time it has been

opened. The blown air (A) is cooled when it comes into contact with

the cold wall, whereas the hotter air (B) is sucked up (

see

diagram

Using the freezer to its full potential

• Use the FREEZER OPERATION knob to adjust the temperature

(

see Description

• Do not re-freeze food that is defrosting or that has already been

defrosted. These foods must be cooked and eaten (within 24

hours).

• Fresh food that needs to be frozen must not come into contact

with food that has already been defrosted. Fresh food must be

stored in the top FREEZER and STORAGE compartment where

the temperature drops below -18°C and guarantees rapid

freezing.

• To freeze fresh food in the best and safest way possible, activate

the SUPER FREEZE function 24 hours before placing the food in

the freezer. After placing the food inside, activate the SUPER

FREEZE function again; it will be deactivated automatically after 24

hours;

• Do not place glass bottles which contain liquids, and which are

corked or hermetically sealed in the freezer because they could

break.

• The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties located

on the bottom left side of the refrigerator compartment (for

example: Kg/24h: 4).

• In order to obtain a greater amount of space in the freezer

compartment, you may remove the bins (except the lowest bin

and the special COOL CARE ZONE bin, which has an

adjustable temperature) and place the food directly onto the

evaporator plates.

! If the room temperature drops below 14°C for an extended period

of time, the ideal temperature will not be reached in the freezer

compartment and food preservation will be reduced.

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the freezer

door. This will help maintain the temperature inside the freezer,

ensuring that foods are conserved for at least 9 -14 hours.

Ice

ice tray*

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer comes into

contact with the food placed inside the freezer compartment;

furthermore, the dripping of the water during filling is avoided (a lid

to cover up the hole after filling with water is also provided).

1. Pull out the tray by pushing it up. Check that the tray is ompletely

empty and fill it with water through the opening provided.

2. Take care not to exceed the level indicated (MAX WATER

LEVEL). Excess water prevents the ice cubes from dispensing

(if this happens, wait for the ice to melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments each

mould fills with water (

see diagram

4. Close the opening with the lid provided and put the tray back,

placing the top part in the corresponding housing and allowing it

to drop in again.

5. When the ice has formed (minimum time approximately 8 hours)

knock the tray against a hard surface and wet the outside so

that the ice cubes come loose and take them out through the

opening.

WATER LEVEL

MAX

WATER LEVEL

MAX

WATER LEVEL

MAX

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the

appliance from the electricity supply:

1. Press the ON/OFF button to switch off the appliance.

2. Pull the plug out of the socket.

! If this procedure is not followed, the alarm may sound. This alarm

does not indicate a malfunction. To restore normal operation, hold the

ON/OFF button down for more than two seconds. To disconnect the

appliance, follow points 1 and 2 above.

* Varies by number and/or position, available only on certain

models.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit BIAA 23 V SI Y Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Trinkwasserkühler Indesit BIAA 23 V SI Y