EN EnglishOperating instructionsDISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3Product Data, 5Assistance, 6Installation, 7
EN10Overall viewDescription of the appliance***Only in completely built-in models.* Only available in selected models. The number and type of wash cyc
EN11Refined Salt and Rinse Aid(°dH = hardness measured in German degrees - °f = hardness measured in French degrees – mmol/l = millimoles per litre) M
EN12Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No pre
EN13*Only available in selected models with different numbers and positions.Adjusting the height of the upper rackIn order to make it easier to arrang
EN14* Only available in selected models.Starting the dishwasher1. Press the ON/OFF button: all the indicator lights on the control panel will light up
EN15Wash cyclesWash-cycle data is measured under laboratory conditions according to European Standard EN 50242.Based on the different conditions of us
EN16Special wash cycles and OptionsDelayed startIt is possible to delay the start time of the wash cycle by 3, 6 or 9 hours:1:After selecting the desi
EN17Care and maintenanceShutting off the water and electricity supplies• Turn off the water tap after every wash cycle to avoid leaks.• Always unpl
EN18TroubleshootingWhenever the appliance fails to work, check for a solution from the following list before calling for Assistance.* Only available i
AR19
2EN Precautions and adviceThis appliance was designed and manufactured in compliance with international safety standards. The following information ha
AR20*
AR2113
AR22
AR23
AR24
AR25
AR26
AR27.
AR28963
AR29
3Saving energy and respecting the environmentSaving water and energy• Only begin a wash cycle when the dishwasher is full. While waiting for the
AR30
AR32195126506.00 NC08/2014 jk - Xerox Fabriano
4
5EN Product Data (product fiche)BrandINDESITModelRated capacity in standard place settings (1)
6EN AssistanceBefore contacting Assistance:• Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting).• Resta
EN7If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.Connecting the
EN8Advice regarding the first wash cycleAfter the installation, remove the stoppers from the racks and the retaining elastic elements from the upper r
EN9Electrical ConnectionElectrical ConnectionIf your appliance is supplied with a 13 amp. fused plug it can be plugged into a 13 amp socket for immedi
Kommentare zu diesen Handbüchern