Indesit ID60C2(K) S Bedienungsanleitung PDF herunterladen (Seite 21)

Care and Cleaning

Cleaning the glass doors

DROP DOWN DOORS

Open the door fully and

carefully slide the first

inner glass towards you,

taking care not to allow the

glass to fall.

If necessary, the glass can

be pushed delicately from

the back side.

Repeat the same

procedure with the next

glass.

Now the external glass

panel can be washed.

WARNING! As soon as the inner and middle glass

panels are removed , the door slams shut.

SIDE OPENING DOORS

Cleaning the door glass is the same as the drop

down doors.

Open the lower door

and lift out the inner

door glass

Remove the two

rubber anti-rattle

bungs

Remove the centre

glass taking care to

support the weight

of the glass when

removing and fitting

The glass panels may now be washed at the sink.

Stubborn stains can be removed by using a fine steel

wool soap pad.

Replace in the reverse order.

Ensure anti-rattle bungs are fitted before fitting inner

door glass.

BE CAREFUL NOT TO DAMAGE THE GLASS PANELS

BY PUSHING THEM TOO HARD.

When fitting the glass make sure it is fitted correctly ie

reflective face is fitted the right way round.

Ensure the glass panel is not subjected to any sharp

mechanical blows. Take particular care not to damage

the inner surface which is coated with a heat reflective

layer. After cleaning, rinse and dry with a soft cloth. For

slight soiling the inner glass panel may be cleaned,

while still warm, without removing it from the door

Warning: Oven must not be operated with inner door

glass removed.

Anti- rattle bung

The door glass is equipped with anti-rattle bungs

which prevents rattling of

the glass when opening

and shutting the oven

main door. These can be

removed for washing.

WARNING : Be careful not

to lose the bungs when

cleaning

Door and Control Panel (Glass)

Regularly wipe with a clean, damp cloth and polish with

a clean, dry cloth.

Door and Control Panel Trims (Stainless Steel)

Regularly wipe with a clean, damp cloth and polish with

a clean, dry cloth.

Replacement of the Oven Light

WARNING: Ensure that the appliance is switched off

before replacing the lamp to avoid the possibility of

electric shock.

Unscrew the glass cover, using a suitable cloth to

protect the fingers and remove carefully. Unscrew the

existing light bulb, and remove. Screw the new bulb

into position and replace the glass cover, with metal

washer, until positioned securely.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit ID60C2(K) S Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern